problems when connect Nokia 7650 to an arm box with BlueZ
hi, everyone
I am currently connect Nokia 7650 to an arm box (kernel 2.4.27) via Serial
Profile using BlueZ(libs-2.14, utils-2.14, hcidump-1.16). The problems are:
1. Every twice connections, one success, and the other said time out.
2. After receive about 5 message from arm box, it do not send back any data, from hcidump output, it simplely stalls.
3. Every twice sending message from Nokia, one success, and one has no effects, hcidump has no output also.
4. If I start hcidump before connection, then I can never connect successfully.
But everything seems to work well when I connect the Nokia 7650 to a PC. So what should I do? Welcome any comments! And thanks a lot in advance! If need any further information, please drop me a mesage.
Yours truly,
Andy
Marcel Holtmann
maintainerHi Andy,
Quoted 12 lines
I am currently connect Nokia 7650 to an arm box (kernel 2.4.27) via Serial Profile using
BlueZ(libs-2.14, utils-2.14, hcidump-1.16). The problems are:1. Every twice connections, one success, and the other said time out.
2. After receive about 5 message from arm box, it do not send back any data, from hcidump output, it simplely stalls.
3. Every twice sending message from Nokia, one success, and one has no effects, hcidump has no output also.
4. If I start hcidump before connection, then I can never connect successfully.
Quoted 2 lines
But everything seems to work well when I connect the Nokia 7650 to a PC.
update bluez-libs and bluez-utils and you should also update your kernel. The 2.4.27 is quite old and it might have bugs.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
hi, Marcel
Thanks for the prompt reply! But for my case, the kernel is hard to change,
could you please advice me what can I do for the time being, to ensure the data can be sent & received correctly?
Regards,
Andy
Quoted 39 lines · Marcel Holtmann
Hi Andy,
Quoted 12 lines
I am currently connect Nokia 7650 to an arm box (kernel 2.4.27) via Serial Profile using
BlueZ(libs-2.14, utils-2.14, hcidump-1.16). The problems are:1. Every twice connections, one success, and the other said time out.
2. After receive about 5 message from arm box, it do not send back any data, from hcidump output, it simplely stalls.
3. Every twice sending message from Nokia, one success, and one has no effects, hcidump has no output also.
4. If I start hcidump before connection, then I can never connect successfully.Quoted 2 lines
But everything seems to work well when I connect the Nokia 7650 to a PC.
update bluez-libs and bluez-utils and you should also update your kernel. The 2.4.27 is quite old and it might have bugs.
Regards
Marcel
-------------------------------------------------------
SF.Net <http://SF.Net> email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Am Don, den 30.06.2005 schrieb Embedded System um 8:39:
Quoted 9 lines
hi, Marcel
Thanks for the prompt reply! But for my case, the kernel is hard to change, could you please advice me what can I do for the time being, to ensure the data can be sent & received correctly?
Regards,
Andy
Quoted 7 lines
On 6/30/05, Marcel Holtmann <[email protected]> wrote:
Hi Andy, > I am currently connect Nokia 7650 to an arm box (kernel 2.4.27) via > Serial Profile using BlueZ( libs-2.14, utils-2.14, hcidump-1.16).
which bluetooth adpater do you use, and what is your cpu? Have you checked that you don't get overrun errors on the serial port?
Erwin
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
hi, Erwin
Thanks for the message, I use a usb doggle, it works fine under my linux
PC.
As for the arm box, the microcontroller is at91rm9200.
Regards,
Andy
Quoted 38 lines · Erwin Authried
Am Don, den 30.06.2005 schrieb Embedded System um 8:39:
Quoted 9 lines
hi, Marcel
Thanks for the prompt reply! But for my case, the kernel is hard to change, could you please advice me what can I do for the time being, to ensure the data can be sent & received correctly?
Regards,
AndyQuoted 7 lines
On 6/30/05, Marcel Holtmann <[email protected]> wrote:
Hi Andy,Quoted 1 line
I am currently connect Nokia 7650 to an arm box (kernel
2.4.27) via
Quoted 1 line
Serial Profile using BlueZ( libs-2.14, utils-2.14,
hcidump-1.16).
which bluetooth adpater do you use, and what is your cpu? Have you checked that you don't get overrun errors on the serial port?
Erwin
-------------------------------------------------------
SF.Net <http://SF.Net> email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users